Відео

great job,so i have one external antenna with two connectors for the router,that means i can only use one ? do i have to buy another antenna if i want to plug two conectors into my lte router??

Im actualy impressed that i got to learn this much I was going around in my LTE routers settings and came across this It said Main antenna and Diversity antenna

Hi Brandon...you invited any of us to comment or correct this video. Not much to correct, but to add. Yes, it is true that FCC and Canadian ISED have a Modular Approval Program, you want to tell developers that you can't simply add a modem in your device you are done. One critical step is to review the FCC and ISED Grant and find and fully understand the 'Condition of Applicability' listed in the Grant(s). If you, as the developer, can't follow this conditions, then you will have test the end-use device (re-test) as if the module was not already approved. And even if you can, there is another important bit of info to share. Which is that the original FCC ID (and/or ISED ID) pf the module will be listed on the end-use device's label....you will not generate and post one under your company name. Lastly, for the European RED, there is not a Modular Approval Program option. many (not all) of the testing will have be performed with the module in the end-use device. The good news it that most all countries in the APAC (Asia & As/NZ) and the Middle East all accept the RED as base evidence of Intentional Radiator testing. Most Central & South American countries accept FCC Grant as the base evidence. So...only two main suite of testing/certification: FCC/ISED Grant and EU RED reports... rob@deviceapprovals.com

Hii please help me im literally struggling from 2 days i am unable to select the serial option on tera term where the serial option is inactive all the time even though i have connected my FPGA board

Promo>SM 💃

Such a unique content. I am here because I broke my iPhone 8 Plus diversity antenna while repairing it. It was the smallest connector. Then I learned that it is called diversity antenna. But the phone was working without any problem. Since I am a curious person and a computer engineer, I ended up here. Thanks for the content.

Thank you for sharing your perspective on this important topic. I am interested in seeking information about the potential and difficulties associated with higher frequencies, specifically focusing on technologies like mmWave, operating around 28GHz or 40GHz bands. Has there been any comparison between these technologies?

Is Cat M1 more susceptible to interference, being that it is for low power devices and battery operated devices?

Very usefull info, got to say i know the scale got something to do with the u.s high schools calification and it's hard to understand the B and D meaning, so i put it in a international scale to A as good and B and any further letter as bad. 🤣 🤣 🤣

🦊Wheeeeeeeeeeeee

great, video that explains nothing

To learn more about the wireless components and connectivity products you can check out our website at: www.airgain.com/

To get more information on Airgain's new Fixed Wireless Access reference design, you can read our press release here: investors.airgain.com/news-events/press-releases/detail/176/airgain-expands-fixed-wireless-access-offering-with

I have no idea what it's used for ? Trying to find video on installing a mini pci express TV tuner card on my laptop . Where does this card slot be located ? Which slot does it goes in ?

I suggest you remove the background music. It is distracting and makes it difficult to follow your mood.

If you measure RX power like RSSI or RTWP would it be 3 dB higher with diversity or 2x2 MIMO?

Short, informative and direct to the point; nice! Have a sub!

You are excellent thanks

And how about NB-IoT over 5G NR?

This was very informative. Thanks

Very helpful!

very knowledgeable . Love it

Modem is obsolete. Video should be removed.

Would love to share these videos with our audience on IoT For All if you're interested :)

If I could request, maybe showing connecting a Skywire modem to maybe an Arduino or ESP32 via UART.

I get the pleasure to work with Shaun often and might have gotten overly excited for this episode seeing him on here. Brilliant Brilliant man.

Using that same ear analogy, the multi antenna system I built for my sdr array, is like having an ear left and right and also an ear on top and bottom of your head. 2 Yagis and 2 omni's

Thanks for interesting stuff! Learned about virtual SIM, that was new for me.

🔥🔥

Well, why does it have to be super fast or super slow? I think LTE-M would be much better if it was 500Mbps or maybe 1Mbps. Is not much but it is also not only 350Kbps.

I am your 1K sub!

Thank you very much!

I got 2 channels because I'm in a spot only 2 vary strong channels... so than I attached my twin lead antenna to that paperclip than I got alot more channels "62"... a paperclip isn't a vary good antenna

I was searching for a module to start experiencing with a cellular network and just found this incredible channel. Much thanks for your invaluable information! referring also for previous videos. I was wondering, how could I verify that the NL-SW-LTE-QBG95-B module, for example, would work in my country? Again much thanks

Does the spacing for 2 LTE MIMO antennas need to be precise, or will an approximate distance of 3 inches be sufficient?

Hello. What if i force stop fota provider

Very well explained.

Will there be part 3 or smiliar project where you actully go into coding the celluler modem?

Thanks Brandon for putting this video together. Will Nimbelink offer eSIM services? Will Nimbelink offer Soft SIMs for some modems? Do we need a specialized SIM card such as eUICC to use eSIM features? Will ICCID change every time the eSIM connects to a different network? If so, how will we know which device is which?

HI Kurt, if the TLS is moved from the "certified Module" to the application MCU, can we assume the "Module certification" is lost, consequently "end device certification" will need to be done entirely by the end customer ?

What is special about using the Nimbelink APNs? For example, NIMBLINK.GW12.VZWENTP? Does it just mean security when it reaches the tower or does it have anything to do with signal quality/strength etc.

I find these NimbeLink videos very informative - keep up the good work.

As I understand the website, this product is for Leonardo, not Uno R3. Just be sure to get the right "Arduino Board".

Could you suggest few methods by which we can add nb-iot and lte-m to our iot solutions?

I don't know why more people haven't seen this. Well done

how about roBox?

name it the inBox

good content but you're explaining to an audience that does not need the visuals of placing a chip in a box, then the box in another box. That was covered sufficiently in the first part.

Very informative. Would like to see a session on programming the on-board ARM processor and interfacing to the on-board I/O components - DigIn, DigOut, AnalogIn, AnalogOut, and the modem API or AT command set.